搜索结果: 1-15 共查到“工学 ceramic”相关记录63条 . 查询时间(0.078 秒)
IMPROVEMENT EVALUATION ON CERAMIC ROOF EXTRACTION USING WORLDVIEW-2 IMAGERY AND GEOGRAPHIC DATA MINING APPROACH
Geographical Data Mining GEOBIA WorldView-2 Ceramic roof C4.5 Decision Tree Classification accuracy
2016/11/24
Advances in geotechnologies and in remote sensing have improved analysis of urban environments. The new sensors are increasingly suited to urban studies, due to the enhancement in spatial, spectral an...
Kansas State University engineer builds paperlike battery electrode with glass-ceramic
Kansas State University engineer paperlike battery electrode glass-ceramic
2016/4/13
A paperlike battery electrode developed by a Kansas State University engineer may improve tools for space exploration or unmanned aerial vehicles. Gurpreet Singh, associate professor of mechanica...
Implementation of a Low-Cost Photogrammetric Methodology for 3D Modelling of Ceramic Fragments
Photogrammetry Computer Vision Archaeology Cultural Heritage Acquisition
2015/11/12
A simple and cheap tool has been developed for measuring shards of old ceramics, found in archaeological yards. It is based on a digital camera, and various photogrammetric and computer vision freewar...
Electrocatalytic Oxidation of Methanol and Ethanol by Carbon Ceramic Electrode Modified with Ni/Al LDH Nanoparticles（图）
nickel aluminium layered double hydroxide modified carbon ceramic electrode electrocatalytic oxidation methanol ethanol
2013/10/4
A Ni/Al layered double hydroxide (LDH) nanoparticle modified carbon ceramic electrode (Ni/Al LDH/NMCC) was fabricated and used for the electrocatalytic oxidation of methanol and ethanol in alkaline me...
Recycling of Glass Fibers from Fiberglass Polyester Waste Composite for the Manufacture of Glass-Ceramic Materials
Valorisation Waste Composite Thermolysis Gasification Glass Fiber Glass-Ceramic
2013/3/11
This work presents the feasibility of reusing a glass fiber resulting from the thermolysis and gasification of waste composites to obtain glass-ceramic tiles. Polyester fiberglass (PFG) waste was trea...
Numerical simulation on foam ceramic blasting block device under the action of explosion transform
ANSYS finite element simulation Euler equation Explosion destructive Foam ceramic blasting block device Blasting block numerical calculation
2012/3/27
The responsive behaviour of the action of under explosion blasting block damaging device structure was investigated based on quality equation, energy conservation equation and thermodynamics equation,...
Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles
Aluminum alloy Composite materials Powder metallurgy Corrosion resistance Polarisation curve Abrasive wear
2010/8/17
Considerable attention is focused on metal matrix reinforced with strength and high modulus ceramic reinforcements because of their superior properties in comparison with most of conventional material...
Dielectric spectroscopy study of Ba0.98Na0.02Ti0.98Nb0.02O3 ceramic
Ceramics Phase transitions Ferroelectrics
2010/1/11
The dielectric spectroscopy method was applied to measure frequency and temperature dependence of complex dielectric permittivity, complex admittance, phase angle. The frequency dependence of ac condu...
Characteristics of phase transitions in Ba0.995Na0.005Ti0.995Nb0.005O3 ceramic
Ceramics Phase transitions Ferroelectrics
2010/1/11
The purpose of this work was to prepare ceramic material BaTiO3 (BT) as well as solid solution of Ba1-xNaxTi1-xNbxO3 (for x = 0.005) (BNTN05) type and correlate their structural (polycrystalline) prop...
Structure and properties of the laser alloyed 32CrMoV12-28 with ceramic powder
Surface treatment Heat treatment Hot work tool steel
2009/12/14
Purpose: The work was performed for the reason to determine the laser treatment parameters, particularly the laser power, to achieve a high value of layer hardness for protection of this hot work tool...
Structure and properties of ceramic preforms based on Al2O3 particles
Composites Ceramic preforms TGA analysis
2009/12/14
Purpose: The main goal of this project is to elaborate and optimize the method of manufacturing the porous, ceramic preforms based on Al2O3 particles used as the reinforcement in order to produce mode...
Thermal diffusivity of RE2Zr2O7 - type ceramic powders intended for TBCs deposited by APS
Metallic alloys Thin&thick coatings TBC
2009/12/3
Purpose: The aim of this paper is to provide overall characteristics of the Laser-Flash method and to determine the thermal diffusivity of powders intended for thermal spraying of thermal barrier coat...
Experimental investigation of viscosity and thermal conductivity of suspensions containing nanosized ceramic particles
I. Tavman A. Turgut M. Chirtoc H.P. Schuchmann S. Tavman
2009/12/2
Purpose: In this study we report measurements of effective thermal conductivity by using 3ω method
and effective viscosity by vibro-viscometer for SiO2-water and Al2O3-water nanofluids at different p...
Characterization of Ba1-xNaxTi1-xNbxO3 ceramic by dielectric spectroscopy
Ceramics Electrical properties Dielectric spectroscopy method
2009/12/2
Purpose: The purpose of this paper was characterization of electric properties of polycrystalline nanograin solid
solution of Ba1-xNaxTi1-xNbxO3, x = 0.65 (BNTN65) within the temperature range 153 K-...
The analysis of strength properties of ceramic preforms for infiltration process
Porous ceramics Si3N4 Alumina carbonitride
2009/12/2
Purpose: The goal of this work is the optimization of sintering process of the ceramic preforms based on Si3N4 and Al2O3-Ti(C,N) materials. The influence of pore forming additives on porosity, microst...