搜索结果: 1-15 共查到“纺织科学技术 Process”相关记录57条 . 查询时间(0.857 秒)
The Association assumes no liability or res ponsibility in connection with the use of
this information or data, including but not limited to any liability or responsibility
under patent, copyrigh...
Modeling of the knitting process with respect to the optimisation of the construction parameters of warp-knitting machines
warp threads construction parameters working-in
2009/6/17
In this article assumptions for the physical and mathematical general model of the knitting
process, referring to both iso- and anisostructural warp-knitted fabrics, have been defined.
In the course...
Assessment of a fabric surface after the pilling process based on image analysis
computer image analysis pilling, pilling grade assessment of changes in the pilled surface
2009/6/17
This study presents the principles of a new method of assessing a pilled fabric surface, especially knitted fabric surfaces. The basis of the method developed consists in analysing a knitted fabric su...
Evaluation of the Influence of Glass Fibre Distribution in Polyamide Matrix During the Consolidation Process on the Mechanical Properties of GF/PA6 Composites
glass fibres textiles composites mechanical properties
2009/6/17
This paper presents the relationship between the glass fibre arrangement in a polyamide 6 matrix during the consolidation process and the mechanical properties of GF/PA6 composites. Three specially de...
Mathematical Modelling of the Pneumatic Melt Spinning of Isotactic Polypropylene. Part III. Computations of the Process Dynamics
melt blowing air-drawing nonwovens polypropylene modelling
2009/6/17
Computer simulation of the pneumatic melt spinning of isotactic polypropylene based on the mathematical model of the process is presented. Two dynamic zones of the air jet-filament interactions along ...
Economic Analysis of the Modern Textiles & Clothing Market within the Process of Final Completion of the ACT/WTO Agreement
European Union globalization foreign trade decorative textiles
2009/6/17
The aim of the paper is to present main tendencies in global and European textile and clothing trade and competitive position of different regions and products especially Far East of Asia countries in...
Research into the Mercerization Process of BeechWood Using the Waxs Method
wood cellulose mercerization WAXS method
2009/6/16
The objective of this study was to establish the relationship between the condition of mercerizationof beechwood (concentration of NaOH solution and time of treatment) and
the degree of conversion ce...
Model of the Compressing Process of a One- and Two-Side Fastened Connector of a 3D Distance Knitted Fabric
knitted 3D fabrics distance fabrics compression process
2009/6/16
A model of the compressing process of a 3D distance knitted fabric was related to a
single connector fastened on one side by an articulated joint, as well as fastened on
both sides by fixed joints, ...
Influence of the Thermal Stabilization Process on the Quality Parameters of Cotton-Type Yarns
cotton-type yarns blended yarns thermal stabilization
2009/6/16
Up to the present, the process of thermal stabilization has most commonly been used for
wool-type yarns. The investigation presented concerns the application of the thermal stabilizationprocess to co...
Multimodality in the Process of Water Absorption by a Textile
Water absorption by textile Darcy's law Retardation phenomenon
2009/5/5
An equation of motion to describe the water penetration through a textile is derived on the basis of Darcy's law of fluid flow through general porous media. Experiments revealed that the process of ...
Analyzing the Path and the Tension of a Yarn under a False-twist Process Using a Doubly Stacked Multi-disk Spindle
Textured yarn Doubly stacked multi-disk spindle Friction twisting
2009/4/21
The path followed by and the tension generated along a yarn under a false-twist process using an enlarged model unit of a doubly stacked multi-disk spindle are measured and analyzed on the basis of a...
Flow-Rate Optimization of Dyeing Liquid in a Liquid Flow Dyeing Process for PET Knit Fabrics
Pump Liquid flow machine Inverter Nozzle Nozzle pressure
2009/4/15
The factors of dyeing technology for PET knit fabrics using liquid flow dyeing machine include the dye exhaustion property of PET fiber and liquid flow parameters in the dyeing machine. This article i...
Interlacing Process of Multiple Filament Yarn
Interlacing process Interlaced yarn Interlacer Yarn motion Airflow
2009/4/15
In interlacing process, a multiple filament yarn, which runs in an air jet device called an interlacer, is hit by high-speed air jet and then, tangling parts and opening parts are made alternatively...
Studies on influence of process variables on characteristics on web structured bulky raw silk using Box and Behnken response surface design
Multibivoltine cocoons Web structured bulky raw silk Rotary traverse mechanism
2009/3/30
The influence of rotary traverse mechanism speed, reel speed and number of cocoons to be reeled for the production of web structured bulky raw silk has been studied using Box-Behnken response surface ...
Effect of temperature on gelation process of sericin aqueous solution
sericin gel formation temperature near-ultraviolet absorbance turbidity cocoon
2009/3/23
Effect of temperature on gelation process of sericin aqueous solution。