搜索结果: 1-9 共查到“口腔正畸学 Temperature”相关记录9条 . 查询时间(0.109 秒)
The influence of mold temperature on the fit of cast crowns with commercially pure titanium
Marginal adaptation Crowns Titanium Dental casting investment
2009/10/19
Commercially pure titanium (CP Ti) has been widely applied to fabricate cast devices because of its favorable properties. However, the mold temperature recommended for the manufacture of casts has bee...
The Low Temperature Heat-treatment of Stainless Steel for Orthodontics
Low Temperature Heat-treatment Stainless Steel Orthodontics
2009/3/16
The Low Temperature Heat-treatment of Stainless Steel for Orthodontics.
The Effect of Cold Temperature Mixing on the Properties of Zinc Phosphate Cement
Cold Temperature Properties Zinc Phosphate Cement
2009/3/9
This investigation was supported by NIH research grant number DE 02668 from the National Institute of Dental Research and by NIH grant number RR 05333 from the Division of Research Resources.
The Effect of Mixing Method, Slab Temperature, and Humidity on the Properties of Zinc
Mixing Method Slab Temperature Humidity Zinc
2009/3/9
The Effect of Mixing Method, Slab Temperature, and Humidity on the Properties of Zinc.
Stiffness Changes in Thermodynamic Nitinol With Increasing Temperature
ELASTICITY STIFFNESS
2009/2/28
Load-deflection measurements on wires fabricated from a new Nitinol alloy which undergoes physical transformations affecting elastic response at body temperature.
The effect of short-term temperature changes on the mechanical properties of rectangular nickel titanium archwires tested in torsion
Orthodontic archwires Materials testing Torsional stiffness Nickel titanium alloys
2009/1/8
Due to their exceptional temperature sensitivity, superelastic nickel titanium wires may be affected by temperature changes associated with ingestion of cold or hot food. It has been assumed that th...
The effect of temperature on the elastic responses to longitudinal torsion of rectangular nickel titanium archwires
Archwires Materials testing Torsional stiffness Nickel titanium alloys Copper nickel titanium alloys Superelasticity
2009/1/8
To investigate responses to longitudinal torsion and the effect of temperature on the torsional stiffness of superelastic nickel titanium archwires, eight batches of rectangular wires were tested at...
Temperature Rise During Orthodontic Bonding With Various Light-curing Units—An In Vitro Study
Temperature rise Pulp chamber Orthodontic bonding Light curing
2008/11/19
The purpose of this in vitro study was to investigate the temperature changes in the pulp chamber during bracket bonding using three different light sources. Bracket bonding was performed on one...
Temperature Rise in the Pulp Chamber duringDifferent Stripping Procedures
Stripping Temperature Pulp chamber Thermocouple
2008/11/5
Objective: To measure the temperature changes in the pulp chamber when different stripping procedures were used without any type of coolant.Materials and Methods: Ninety intact, freshly extracted huma...